亚洲黄色网址,av天堂岛,亚州性爱AV,黄色成人动漫网站AV,亚洲另类视频

Shanghai Xinwei Cemented Carbide Co.， Ltd

上海鑫威硬质合金有限公司

Shanghai XinweiCemented Carbide Co., Ltd. 中国·江苏

本公司生产的产品为通径DN6～DN1000mm，公称压力为0.1Mpa\~16Mpa的各种材质的船用阀门及船用附件、快关阀控制系统、装件、仪器、仪表等。 D

公司通过ISO9001(2008)质量体系认证，产品符合CCS、ABS、GL、LR、BV、NK、DNV、RINA、KR等各国船级社质量要求，

公司秉承尊重科技、创造价值、实现共赢的理念，以

上海鑫威硬质合金有限公司

7产品展示 Product display

兴

画

铸钢截止阀B cast steel stopvalve B

法兰青铜截止阀B Flangebronze stop B

法兰青铜截止阀A Flange bronze stop A

铸钢截止阀A caststeel stopvalveA

IT

外螺纹锻钢截止阀 External thread forgedsteel globevalve

外螺纹青铜直通截止阀 Theouterwhorl bronze throughvalve

外螺纹青铜直角截止阀 The outer whorl bronze anglevalve

锻钢截止阀 Forged steel globe valve

萬王

外螺纹重块式快关阀 External threadheavyblock type quick closingvalve

铸钢舷侧截止止回阀 Cast steel side stop check valve

青铜减压阀Bronze valve

铸钢蒸汽减压阀 Caststeelsteamvalve

夏夏夏

音台音

铸铁单排三联阀箱 Cast iron single triple valve box

铸铁单排双联阀箱 Cast iron single double valvebox

铸铁双排截止阀箱 Cast iron double valve box

青铜单排双联阀箱 Bronzesinglerowofdouble valvebox

上海鑫威硬质合金有限公司

7产品展示 Product display

IP

青铜双排三联阀箱 Triplevalveboxbronzedouble

青铜单排三联阀箱 Bronzesinglerowtriple valvebox

铸钢通海阀 Cast steel gatevalve

青铜通海阀Thebronzesea valve

夏

A

直通消防阀Through thefirevalve

直角消防阀Rectangularfirevalve

船用直通快关阀 Shipthrough the quick closingvalve

船用直角快关阀Marinerightquickclosingvalve

志

内螺纹青铜截止阀 Internal thread bronze globevalve

铸铁直角安全阀 Cast ironanglevalve

内螺纹青铜直通止回阀 Theinnerwhorl bronze straightcheckvalve

压力表阀 Pressure gaugevalve

出

压力表阀B Pressure gauge valve

青铜节流阀Bronzevalve

外螺纹青铜直角节流阀 External threadbronzerectangula rthrottlevalve

内螺纹青铜闸阀 Bronzegateinternal thread

上海鑫威硬质合金有限公司

7产品展示Productdisplay

山

P

福

自闭式防泄阀ASSelf closing discharge valve

水减压阀Waterpressurereducingvalve

撞击式截止阀 Impacttypevalve

油舱呼吸阀A Breathingvalveoil tankA

油舱呼吸阀B Breathingvalveoil tankB

青铜安全阀Bronzevalve

疏水阀 Drainvalve

青铜直通防浪阀 Bronzethroughstormvalve

青铜直角防浪阀 Bronzerectangularwave proofvalve

可闭立式防浪阀 Closeverticalstorm valve

法兰青铜吸入式止回阀Bronzeflangedsuctioncheckvalve

当

中

法兰铸铁吸入式止回阀Flangecastironsuctioncheckvalve

Airreducingvalve

大便冲洗阀 Toiletflushvalve

测深自闭阀 Sounding self closing valve

上海鑫威硬质合金有限公司

7产品展示 Product display

闸阀型测深自闭阀 Gatevalve typesounding self closing valve

板式止回阀 Swing check valve

&

不锈钢截止阀Stainlesssteelvalve

集

铸铁闸阀 Cast iron gate valve

真

铸钢闸阀 Cast steel gate valve

青铜闸阀Bronze gate

青铜闸阀Bronzegate

不锈钢闸阀 Stainlesssteel gate valve

三通旋塞Threeway cock

压力释放阀 Pressurereleasevalve

波纹管截止阀bellowsglobevalve

内螺纹球阀Internalthreadballvalve

三片式内螺纹球阀 Threepiece type internal threadballvalve

法兰球阀Flangedball valve

三片式法兰球阀 Three piece ball valve flange

内螺纹三通球阀 Internal threadballvalve three

上海鑫威硬质合金有限公司

7产品展示 Productdisplay

法兰三通球阀Threeflangedballvalves

电动三通球阀 Electric threeballvalves

锻钢固定球阀Forgedsteelball valve

蝶形止回阀 Butterfly typecheckvalve

旋起式止回阀 Screwtypecheckvalve

自动透气阀Automaticvent valve

内螺纹疏水阀Internal threadtraps

稳压阀 Regulatorvalve

Qe

API蝶阀 API butterflyvalve

API蝶形止回阀 APIbutterflycheckvalve

API截止阀 APIvalve

API球阀 APIball valve

十

西

API闸阀APIvalve

API止回阀 APlcheckvalve

J类法兰自闭式放泄阀 Jflangeself closingdischargevalve

J类截止阀 Jtypeglobevalve

上海鑫威硬质合金有限公司

7产品展示 Product display

e

中

A

J类青铜截止阀A TheJclass bronze globe valveA

J类青铜截止阀B TheJ class bronze globe valveB

J类青铜泄放阀ATheJclassbronzereliefvalve A

J类青铜泄放阀B TheJclass bronze relief valveB

H

J类软管直角接头阀 J hose right angle valve

压力调节阀 Pressure regulating valve

手液动截止阀Hand hydraulic valve

法兰不锈钢直角安全阀Stainlesssteel flangedrectangularsafetyvave

水减压阀Water pressure reducing valve

双联放泄阀Doubledrainvalve

空气信号安全阀Airsignalsafetyvalve

竖式止回阀 Vertical check valve

光

自力式压力调节阀 Self pressure regulating valve

船用直角泥箱Rectangular mud box for ship

汽水分离器 Steamwaterseparator

单联油滤器Single chain oil Colander

上海鑫威硬质合金有限公司

7产品展示 Productdisplay

国际通岸接头 Internationalshoreconnection

甲板排水塞Deckdrain plug

空气管头Airpipehead

快速接头 Fast joint

喷淋头 Thespray head

双联油滤器Doubleoil filter

可调式节流孔板Adjustableorificeplate

国际通岸接头International shoreconnection

二

巴拿马国际通岸接头PanamainternationaIshoreconnection

金属波形膨胀节 Metalbellowsexpansionjoint

亚

镜型液流观测器 Mirrortypeliquidflowobserver

筒型液流观察器 Cylindertypeflowobserver

不锈钢空气管头Airpipe head stainlesssteel

测深头 Sounding head

吸入粗水滤器 Inhalationofseawaterfilter

蒸汽滤器 Steamstrainer

上海鑫威硬质合金有限公司

7产品展示 Product display

吸入口The suction port

吸入滤网 Suction strainer

小轴转动装置Small shaftdrivedevice

甲板操纵装置Deckcontroldevice

美

消防阀接头Fire protection valve

YA甲板漏水口 YA deckWaterLeakagemouth

TA甲板漏水口 TAdeckWaterLeakagemouth

船底吸入格删Bilge suction grille

号

WIO

船用消防水枪Marine fire gun

蒸汽减压阀组 Steam pressure reducing valve group

流水阀组 Hydrophobic valve group

HHHNH

空气减压阀组 air relief valvve group

恒温流水阀组 Thermostatic valve group

本阀适用于船舶污水管系，其法兰连接尺寸按JIS B 220，结构尺寸参照JISF标准。本阀由我公司制造。

This cast steel vertical storm valve with hand wheelis suitable fordirty waterline system.Flanged ends to JlS B2220.This valve is made by my company.

参数和样图Main Dimensionand Drawing

1.1)主要参数TypeandBasicDimension

1.2)图样 Drawing

(mm)

3.主要部件材料MaterialofMainParts

4.标记示例OrderingExample

1)符合JIS标准0.5MPaDN65mm铸钢可闭立式防浪阀 Flange ends to JIS PNO.5MPa DN65 type cast steel vertical stormvalve with hand wheel A65 HLFV001-00
2)符合JIS标准0.5MPaDN150mm铸钢可闭立式防浪阀 FlangeendstoJISPN0.5MPa DN150 type cast steel verticalstormvalvewith handwheelA150 HLFV001-00

5.技术要求Specification

1)材质详见主要部件材质表 ThevalvematerialsseeMATERIALofMAINPARTStable.
2)防浪阀的开启压力为0.1MPa Thestormvalve open pressure is O.1MPa
3)其他技术要求、试验方法和检验规则按GB600-91。 Otherspecification of test and acceptance standard see GB600-91.

本阀适用于船舶污水管系，其法兰连接尺寸按JIS B2220，结构尺寸参照JISF标准。本阀由我公司制造。

This caststeel vertical storm valve (angle type)with hand wheelis suitable fordirty waterline system.Flanged ends to JIS B 2220.This valve is made by my company.

1.参数和样图Main Dimensionand Drawing

1.1)主要参数TypeandBasicDimension

1.2)图样 Drawing

(mm)

3.主要部件材料MaterialofMainParts

4.标记示例OrderingExample
1)符合JIS标准0.5MPa \mathsf { D N 8 0mm } 铸钢直角可闭立式防浪阀 Flange endsto JIS PNO.5MPa DN80mm type cast steel vertical stormvalve (angle type)with hand wheel B65 HLFV002-00
2)符合JIS标准0.5MPaDN150mm铸钢直角可闭立式防浪阀 Flange endsto JIS PN0.5MPa DN150mm type cast steel vertical storm valve (angle type) with hand wheel B150 HLFV002-00

5.技术要求Specification

1)材质详见主要部件材质表 ThevalvematerialsseeMATERIALofMAINPARTS.
2)防浪阀的开启压力为0.1MPa。 Thestorm valve openpressure is 0.1MPa.
3)其它技术要求、试验方法和检验规则按GB600-91。 Otherspecification of test and acceptance standard see GB600-91.

PN1.0MPa法兰铸钢闸阀适用于淡水、燃油、滑油及成品油管路。该产品法兰连接尺寸按JIS B2220,10K连接标准，结构长度符合JISF7366。

Thisflangecaststeelgate valvecanbeusedforfresh water,sea water,lubricatingoilandfueloil,Matingdimensions of the flanges conform to JISB222010K,face to face dimensionaccording to JISF7366.

型式、参数和基本尺寸TypeandMainDimensions1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimensions

(mm)

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

PN1.0MPa, \mathsf { D N S 0mm } 的法兰铸钢闸阀，法兰连接按标准JISB2220PN1.0MPa Forexample:PN1.0 MPa DN50mm flange cast steel gate valve according to JIS B2220PN1.0MPa 10050HLFV004-00

四、技术要求Specification

1)材质详见"主要部件材质表"。Thevalvematerials seeMainPartsMaterial.
2)法兰连接尺寸按JIS B 2220。Flanges joint dimension conform to JISB 2220.
3)其他制造、试验和验收技术条件按 GB600-91。Other specification of test and acceptance shal conform to GB600-91.

PN1.6MPa法兰铸钢闸阀 KPN1.6 MPa Flange cast steel gate valve V 005-00

PN1.6MPa法兰铸钢闸阀适用于淡水、燃油、滑油及成品油管路。该产品法兰连接尺寸按JISB22016K连接标准。

Thisflangecaststeel gatevalvecanbeusedforfresh water,sea water,lubricating oilandfueloil,Matingdimensions of the flanges conform to JIS B 2220 16K.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸 Drawing and Dimensions

(mm)

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

PN1.6MPa, \mathsf { D N 1 5 0mm } 的法兰铸钢闸阀，法兰连接按标准JISB2220PN1.6MPa Forexample:PN1.6 DN1 5 0 \mathsf {mm } flangecaststeel gatevalveaccording to JISB 2220PN1.6MPa, 16150 HLFV005-00

四、技术要求Specification

1)材质详见“主要部件材质表"。ThevalvematerialsseeMainPartsMaterial.
2)法兰连接尺寸按JIS B 2220-1990。Flanges joint dimension conform to JIS B 2220-1990.
3)其他制造、试验和验收技术条件按GB600-91。Other specificationof test and acceptance shallconform to GB600-91.

PN1.0MPa弹簧回复法兰铸钢截止止回阀 V 006-00

PN1.0MPa弹簧回复法兰铸钢截止止回阀适用于淡水、燃油、滑油及温度低于 2 2 5 % 的蒸汽管路。该产品法兰接口尺寸按ISO7005连接标准，其他结构尺寸符合ISO5752-1979。

This spring relief cast steel stop check valve can be used for fresh water,sea water,lubricating oil and steam of 2 2 5 { ^ c } and under. Connection dimensions of the flanges conform to ISO 7oo5,face to face dimension according to ISO 5752-1979.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

2)图样和基本尺寸Drawingand Dimension

2.1)法兰连接按 ISO 7005 PN1.0MPa Connection Dimension Conform to ISO 7005 PN1.0MPa (mm)

2.主要部件材质表MAINPARTSMATERIAL

3.示例Howto Order

1)通径≤250,如：PN1.0MPa, \mathsf { D N S 0mm } 的A型弹簧回复铸钢截止止回阀 DN <=slant 250,For example: PN1.0 DN50mm type A spring relief cast steel stop check valve A10050 V006-00

2)通径 <=slant 3 5 0 ，如：工作压力0.6MPa，PN1.0MPa，DN350的B型弹簧回复球铁截止止回阀 DN <=slant 350,Forexample:Working pressure O.6MPa,DN350 type B spring relief cast iron stop check valve B6350 V006-00

3)通径 = 4 0 0 ，如工作压力0.4MPa，PN1.0MPa，DN400的B型弹簧回复铸钢截止止回阀 DN=400,For example:Working pressure O.4 Mpa,DN400 type B spring relief caststeel stop check valve B4400 V006-00

4.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按ISO7005。 Flanges connection dimensions conform to ISO 7005.
3)为保证阀门开启灵活，需定期向填料函内加注黄油润滑。 For keeping valve opening easily,the gasket should be lubricated.
4)弹簧的开启压力可按用户要求设定，但不能低于0.1MPa,也不可大于阀门正常工作压力。 Thespring pressre can be set according to customer,but the set pressure should up O.1MPaand below valve working pressure.
5)其他制造、试验和验收技术条件按GB600-91 Other specification of test and acceptance shall conform to GB600-91.

该自闭式放泄阀适用于船舶燃油、滑油、水等管路的箱柜

Thisself-closing reliefvalvecan beused tofresh water,sea water,lubricating oilandfueloil.Matingdimensions of theflanges conformto ISO7005or JIS B2220and JIS B2240,structure dimensionfitforJISF7398-1976.

1形式、参数和基本尺寸TypeandDimension 1)阀的型式和参数TypeandBasicDimension

2)放泄阀的基本尺寸和图样Drawingandbasiccharacter

(mm)

(mm)

2.标记示例Howtoorder

ISOPN0.6DN25A型青铜自闭式放泄阀A6025Q 007-00-1
ISO0.6MPa Type Abronze self-closing relief valve A6025Q 007-00-1
JISPN0.5DN25U型弯头铸钢自闭式放泄阀U5025 007-00-2
JISO.5MPaTypeUcaststeelself-closingreliefvalve U5025 007-00-2

3.技术要求Specification

1)阀体材料为ZG230-450或ZCuSn10Zn2，下阀盖、阀盘、阀杆、阀座材料为ZCuAI9Mn2、ZCuAI9Mn2;弹簧材料为 60Si2Mn.Thevalve materials see MAIN PARTS MATERIALTABLE.

2)法兰连接尺寸按ISO 7005(GB2501-89)和JISB2220标准。 Flanges joint dimension conform to ISO 7005 (GB2501-89) and JISB 2220.
3)结构长度按JISF7398-1976标准。 Structure character conform to JISF7398-1976.
4)外螺纹连接尺寸按CB821-75。 Connect screw thread conform to CB821-75.
5)其他制造、试验、验收技术条件按GB600-91. Specification of testandacceptanceshall conformto GB600-91.

PN1.0MPa法兰不锈钢截止阀/截止止回阀 V 008-01/02

valve& stop check valve

PN1.0MPa法兰不锈钢截止阀截止回阀用于淡水、燃油、滑油及温度低于 3 0 0 ^ { \circ } { C } 的蒸汽管路。该产品法兰接口尺寸按ISO7005连接标准，其他结构尺寸符合ISO5752-1979。

This stainless steel stop valve can be used for fresh water,sea water,lubricating oil and steam of 3 0 0 ^ { \circ } { C } and under.Connectiondimensionsoftheflangesconform to ISO7oo5,facetoface dimensionaccording to ISO5752- 1979.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimension

(mm)

2.主要部件材质表MAINPARTSMATERIAL

3.示例Howtoorder

1)通径小于250,如：PN1.0MPa, \mathsf { D N S 0mm } 的A型不锈钢截止阀 DN \lessgtr 250,For example:PN1.0 DN50mm type A stainless steel stop valve A10050 V008-01

2)通径 \lessgtr 350,如：工作压力0.6MPa,PN1.0MPa,DN350的B型不锈钢截止止回阀 DN <=slant 350,For example:Working pressure O.6MPa,DN350 type B stainless steel stop check valve B6350 V008-02

4.技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按ISO7005。Flanges Connection dimensionconform to ISO 7005.
3)其他制造、试验和验收技术条件按GB600-91.Otherspecification of test and acceptance shall conform to GB600-91.

PN1.0MPa/2.5MPa/1.6MPa法兰不锈钢止回阀√PN1.0MPa/2.5MPa/1.6MPaFlange stainlesstel check valve V 009-00

PN1.0MPa/2.5MPa/1.6MPa法兰不锈钢止回阀适用于淡水、燃油、滑油及温度低于 3 0 0 ^ { \circ } \mathsf { C } 的蒸汽管路。该产品法兰接口尺寸按ISO7005连接标准，其他结构尺寸符合ISO5752-1997。

Thisstainless steel check valvecan be used forfresh water,sea water,lubricating oil and steam of 3 0 0 ^ { \circ } \mathsf { C } and under.Connection dimensions of the flanges conform to ISO7oo5,face to face dimensionaccording to ISO5752- 1979.

2)图样和基本尺寸Drawingand Dimension

Type A Type B

(mm)

3.主要部件材质表MAINPARTSMATERIAL

4.示例Howto order
PN1.0MPa，DN50mm的A型不锈钢止回阀
PN1.OMPa, DN50mm type A stainess steel check valve
A10050 V009-00

5.技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMAINPARTSMATERIALtable.
2)其他制造、试验和验收技术条件按GB600-91.Otherspecification of test and acceptance shall conform to GB600-91.

PN1.6MPa法兰不锈钢截止阀/截止止回阀√PN1.6MPa Flange stainless stop valve V 010-01/02 &stop check valve

PN1.6MPa法兰不锈钢截止阀、截止止回阀适用于淡水、燃油、滑油及温度低于 3 0 0 ^ { \circ } \mathsf { C } 的蒸汽管路。该产品法兰接口尺寸按GB569-65连接标准，其他结构尺寸符合GB/T584。

This stainless steel stop valve and stop check valve can be used forfresh water,sea water,lubricating oil and steamof 3 0 0 ^ { \circ } \mathsf { c } and under.Connection dimensions of the flanges conform to GB569-65,face to face dimension according to GB/T584.

2)图样和基本尺寸DrawingandDimension

PN1.6MPa Flange stainless stop valve V PN1.6MPa法兰不锈钢截止阀/截止止回阀 & stop check valve V010-01/02

2.主要部件材质表MAINPARTSMATERIAL

3.示例How to Order

PN1.6 MPa, \mathsf { D N S 0mm } 的A型不锈钢截止阀
PN1.6MPa,DN50mm的A型不锈钢截止止回阀
For example:PN1.6MPa,DN50mm type A stainless steel stop valve
A16050 V010-01
For example:PN1.6MPa,DN50mm type A stainless steel stop check valve

A 16050 V010-02

4.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按GB569-65。 Flanges connection dimensions conform to GB569-65.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

1.6MPa法兰青铜截止阀 V 011-00

1.6MPa法兰青铜截止阀已广泛用于出口海洋船舶的海水、淡水、滑油、燃油和温度 { t } <=slant 250℃的蒸汽管路。其法兰连接尺寸与JISB2240一致，结构长度与JISF7303-1976JISF7304-1976、JISF7348-1980及JISF7349-1980一致，其他尺寸符合CB605-78。

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS
1)截止阀的型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimensions

mm

2.标记示例

PN1.6、DN15的A型（直通)法兰青铜截止阀： 截止阀A16015 V011-00
PN1.6、DN15的B型(直角)法兰青铜截止阀; 截止阀B16015 V011-00

3.技术要求

1)截止阀阀体、阀盖、阀盘材料为ZCuSn10Zn2、阀杆材料为QAI9-2.
2)法兰连接尺寸按JISB2240。

4其他制造、试验和验收技术条件按GB600-91.

本阀适用于介质为海水、淡水、油类和温度不高于 2 5 0 ^ { \circ } { C } 蒸汽船舶管路，其法兰连接尺寸符合JISB2240者ISO7005，结构尺寸符合JISF7371-1978。

This swing check valve can be used for fresh water,sea water,lubricating oil and steam of 2 5 0 ^ { \circ } { C } and under Mating dimensionsof the flanges conformto ISO7005orJISB2240,structure dimension fit forJISF7371-1978

1.参数和样图Main Dimensionand drawing

1)主要参数MainDimension

2)样图Drawing

2.法兰及结构尺寸

(注采用平法兰Notice:the flange face is plane)

(mm)

(mm)

3.主要部件材料Materialofmainparts

4、标记示例HowtoOrder

JIS标准0.5MPaDN50青铜摆式止回阀
JIS0.5MPaDN50mm Bronze SwingCheckValve5050 V012-00-2
ISO 标准0.6MPaDN25青铜摆式止回阀
ISO 0.6MPa DN25 Bronze Swing Check valve 6025 V012-00-1

5、技术要求 Specification

1)材质详见“主要部件材质表”。ThevalvematerialsseeMainPartsMaterial.
2)其他制造、试验和验收技术条件按GB600-91Other specification of test and acceptance shall conform to GB600-91.

图样：

0OI0IO04

结构尺寸：(ISO标准)

(mm)

结构尺寸：（JIS标准）

(mm)

结构尺寸：(GB标准)

(mm)

安装型式：

A型

疏水阀主要零件材料：

B型

带滤器恒温疏水阀组（法兰连接） V 014-00

图样：

(mm)

(mm)

(mm)

安装型式：

对夹升降立式止回阀V 015-00

本阀适用于介质为海水、淡水、原油、成品油及蒸汽的船舶管路，其对夹法兰连接尺寸符合ISO7005或者JIS B2240。

Thiswafertypeliftcheckvalvecanbeusedforfreshwater,seawater,crudeoil,finishedoilandsteamcargoline system.Mating dimensions of the flanges conform to ISO 70o5or JISB2220.

1.参数和样图 Main Dimension and Drawing

1)主要参数TypeandBaseDimension

2)样图Drawing

2.结构尺寸ValveDimension

(mm)

3.主要部件材料MaterialofMainParts

4.标记示例 Ordering Example

1)ISO标准0.6MPaDN50mm铸钢阀体，不锈钢阀板，对夹升降式止回阀 ISO PNO.6MPa DN50 Cast steel body,stainless steel disc wafer type vertical lift check valve 6050G V015-00
2)ISO标准1.0MPaDN125mm不锈钢阀体，不锈钢阀板，对夹式升降止回阀 ISO PN1.OMPa DN125 Stainless steel body,stainless steel wafer type vertical lift check valve 10125Cr V015-00

5、技术要求Specification

1）材料见主要部件材料表.ThevalvematerialsseethetableMATERIALOFMAINPARTS.

2)其他要求按、试验方法和检验规则按GB600-91.

Other specification of test and acceptance standard see GB600-91.

法兰铸钢/青铜手液动通海阀是管系通往船底或船舷的阀门，该阀门可实现液动遥控，适用于海水和淡水介质

This manual & hydraulical operated sea water valve can be used to sea waterand fresh water on board,The nating dimension of flangeaccording to ISO 7005 PN1.0MPa or JIS2220.

一、图样Drawing

二、型式和基本参数Typeand Basic Dimension

三、法兰连接尺寸FlangeDimension

(mm)

四.标记示例

法兰按ISOPN1.0MPa,DN300mm
Flange according to ISO1.OMPa DN300 mm manual& hydraulic operated bronze sea water valve
B3300Q 016-00

五、技术调节Specification

1.法兰连接尺寸按 ISO1.0MPa或JIS10K.Flange dimensionaccording to ISO1.0MPaor JIS10K
2.阀件材料可采用青铜 (ZCuAl9Mn2)或铸钢(ZG230-450).The valve material is bronze or cast steel.
3.其他检验条件按 GB600-91.Other specification of test and acceptance shall conform to GB600-91.

船用法兰铸钢蒸汽减压阀适用于温度t≤300℃的船舶及各种工业水蒸汽管路。

一、参数和基本尺寸

1)蒸气减压阀的参数

(mm)

(mm)

2.标记示例OrderingExample

用于初始压力P:0.4\~2.5减压压力 { \mathsf { P } } { : } 0 . 2 { ~ } 1 . 2 。进口公称通径 \mathsf { D N } , 4 0 出口公称通径 \mathsf { D N } _ { 2 } 4 0 的蒸汽减压阀：(ISO标 隹连接法兰)

蒸汽减压阀25/2\~12040 V017-00-1-DHG

用于初始压力P:0.4\~2.5减压压力 { \mathsf { P } } { : } 0 . 2 { ~ } 1 . 2 ，进口公称通径DN40.出口公称通径 { \mathsf { D N } } _ { 2 } 4 0 的蒸汽减压阀：(JIS标
准连接法兰)
蒸汽减压阀4\~25/2\~12040/50 V017-00-2-DHG

3.技术要求

1)减压阀的工作条件为阀的前后压力差≥0.2MPa.

2)减压阀的本体、副阀本体、下盖、上盖材料为ZG230-450；膜片材料为QSn6.5-0.1：主阀、副阀、弹簧材料为50CrVA；调节弹簧材料为60Si2Mn.
3)法兰连接尺寸按ISO7005和JISB2220标准。
4)空气减压阀应由制造厂技术检查部门检查合格，方可出厂。

船用法兰铸钢蒸汽减压阀代号编制示例

一、代号

二、编制说明

1.减压阀材料牌号：G-ZG230-450 Cr-1Cr18Ni9Ti Q-ZCuAI9Mn2

2.减压阀的型号：H-活塞式减压阀

3.减压阀法兰标准：1-ISO7005标准 2-JIS2220标准3-GB569-65标准

AS型

BS型

(mm)

标记示例：

公称压力为2.5MPa，公称通径为 5 0mm 的铸钢AS型船用法兰直通柱塞阀(四进位)柱塞阀AS25050G V18Z-02
公称压力为1.6MPa，公称通径为 \scriptstyle 1 0 0 { \mathsf {mm } } 的铸钢BS型船用法兰直通柱塞阀(四进位)柱塞阀BS16100G V18Z-02

PN1.0MPa法兰铸钢截止阀适用于淡水、燃油、滑油、空气及温度低于 3 0 0 ^ { \circ } { C } 的蒸汽管路。该产品法兰连接尺寸按JISB2220标准，结构尺寸符合JISF7319-1975及JISF7320-1975，并完全按照JIS标准设计生产。

This PN1.OMPa flange cast steel stop valve can be used for fresh water,sea water,lubricating oil, compressedairand steamof 3 0 0 ^ { \circ } \mathsf { C } and under.Connecting dimensions of the flanges conform to JIS B 2220,face tofacedimension fitfor JISF7319-1975andJISF7320-1975.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimension

PN1.0MPa法兰铸钢截止阀/截止止回阀 V 019-00

(mm)

2.主要部件材质表MAINPARTSMATERIAL

3.示例Howto Order

1)PN1.0MPa，DN50mm的B型法兰铸钢止阀

For example:PN1.0 DN50mm type B cast steel stop valve B10050 V019-01
2) PN1.0MPa,工作压力0.5MPa, \mathsf { D N 4 0 0mm } 的A型法兰铸钢截止阀 For example:PN1.0MPa,working pressure 0.5MPa \mathsf { D N 4 0 0mm } type A flange cast steel stop valve A5400 V019-01
3)PN1.0MPa,工作压力0.5MPa,DN400mm的A型铸钢截止止回阀 For example: PN1.0MPa,working pressure 0.5MPa DN400mm type Aflange cast steel stop check valve A5400 V019-02

4.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按JISB2220PN1.0MPa. Flanges joint dimensionconform to JISB 2220 PN1.0MPa.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

法兰铸钢通海阀是管系通往船底或船舷的阀门。该产品法兰接口尺寸按JISB2220连接标准，结构尺寸符合JIS F 7350-1975。

Thisflange cast steel sea water valve is used for marine sea water system.Connection dimensions of the flangesaccording to JISB2220,face to face dimensionsaccording to JISF7350-1975.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimension

(mm)

2.主要部件材质表MAINPARTSMATERIAL

3.示例How to Order

1)通径小于350,如：PN0.4MPa, \mathsf { D N } 2 5 0 \mathsf {mm } 的B型铸钢通海阀，法兰按JIS10K DN <=slant 3 5 0 ,For example:PNo.4DN250mm type Bcast steel sea water valve flangeaccording to JIS 10K B4250 V020-00
2)通径≥ 4 0 0 \mathsf {mm } ，如:PN2.5MPa,DN450mm的B型铸钢通海阀，法兰按JIS 10K DN≥400mm,For example:PN2.5MPa,DN450mm type Bcaststeel sea water valve flange according to JIS10K B3450 V020-00

4.技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按JISB222010KFlangesconnection dimensionsconform to JlSB222010K.
3)其他制造、试验和验收技术条件按GB600-91.Other specification of test and acceptance shall conform to GB600-91.

本阀适用于介质温度不高于 1 5 0 ^ { \circ } { C } 的船舶燃油管路，其法兰连接尺寸符合JISB2220，ISO7005或者GB569-65。

This cast steel quick-closing valve for pneumatic operation is suitable for { t } <=slant 150C fuel oiland diesel oil cargo inesystem.Flanged ends to ISO 7005orJISB 2220.

1参数和样图Main dimensionand drawing

1.1)主要参数Type and Basic Dimension

1.2)样图Drawing

2.结构尺寸ValveDimension

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

3.主要部件材料MaterialofMainParts

4.标记示例OrderingExample
1)ISO标准0.6MPa \mathsf { D N S Omm } A型铸钢气动快关阀 ISO PNo.6MPa DN50 type A cast steel quick-closing valve for pneumatic operation A6050 HLFV022-00-1
2)JIS标准1.0MPaDN125mmB型铸钢气动快关阀 JIS PN1.0MPa DN125 type B cast steel quick-closing valve for pneumatic operation B10125HLFV022-00-2

5.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMaterial ofmain parts table.
2)气缸的启动压力为0.3-0.7MPa. Thecylinderworkingpressure is 0.3-0.7MPa.
3)其他技术要求、试验方法和检验规则按GB600-91. Otherspecification of test and acceptance standard see GB6o0-91.

本阀适用于介质温度不高于150°℃的船舶燃油管路，其法兰连接尺寸符合JISB2240,ISO7005或者GB571-65。

This bronze quick-closing valve for pneumatic operation is suitable for { t } <=slant 150℃ fuel oil and diesel cargo line system.Flanged ends to ISO 7005orJISB2240.

1.参数和样图Main Dimensionand Drawing

1)主要参数TypeandBaseDimension

1.2)样图Drawing

2.结构尺寸ValveDimension

(mm)

(mm)

(mm)

(mm)

(mm)