亚洲黄色网址,av天堂岛,亚州性爱AV,黄色成人动漫网站AV,亚洲另类视频

PN1.0PMa法兰铸钢截止阀/截止止回阀 V025-01/02

PN1.0MPa法兰铸钢截止阀/截止止回阀适用于淡水、燃油、滑油及温度低于 3 0 0 ^ { \circ } { C } 的蒸汽管路。该产品法兰接口尺寸按ISO7005连接标准，其他结构尺寸符合ISO5752-1979。

This stop valve and stop check valve can be used forfresh water,sea water,lubricating oiland steamof 300 Cand under Connectiondimensionsof the flanges conform to ISO7oo5,faceto face dimension fitfor ISO5752- 1979.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimension

法兰铸钢截止阀<br>法兰铸钢截止止回阀

(mm)

(mm)

2.主要部件材质表MAINPARTSMATERIAL

3.示例HowtoOrder

1)通径小于250,如：PN1.0MPa,DN50mm的A型铸钢截止阀， DN \lessapprox 250,For example: PN1.0 DN50mm type A cast steel stop valve A10050 V025-01
2)通径 <=slant 3 5 0 ，如：工作压力0.6MPa,PN1.0MPa,DN350的B型铸钢截止阀 DN \lessgtr 350,For example:Working pressure 0.6MPa,DN350 type B cast steel stop valve B6350 HLFV025-01
3)通径≥400,如： 0.4MPa,PN1.0MPa,DN400的A型铸钢截止止回阀 DN >=slant 4 0 0 ,For example:Working pressure 0.4MPa,DN400 type A cast steel stop check valve A4400 V025-02

4.技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按ISO7005Flanges joint dimension conformto ISO7005.
3)其他制造、试验和验收技术条件按GB600-91.Otherspecification of test and acceptance shall conform to GB600-91.

PN1.6PMa法兰铸钢截止阀/截止止回阀√ PN1.6MPa Flange cast steelstop&stop check valve V026-01/02

PN1.6MPa法兰铸钢截止阀、截止止回阀适用于淡水、燃油、滑油及温度低于300C的蒸汽管路。该产品法兰连接尺寸按ISO 7005或JISB2220连接标准，结构长度符合ISO5752-1982(E)．其他尺寸符合GB/T584。

This flange cast steel stop valve and stop check valvecan beused forfresh water,sea water,lubricating oil and steam of 300anduner.Mating dimensions of theflanges conform to ISO7005or JISB2220,strucature dimension fit for ISO5752-1982(E).

2)图样和基本尺寸DrawingandDimensions

(mm)

(mm)

二、主要部件材质表MAINPARTSMATERIAL

1)符合ISO7005连接法兰标准截止阀、截止止回阀主要部件材质

According to ISO 7Oo5 flange standard stop valveand stop check valvemain parts material

V026-01/02

2)符合JISB2220连接法兰标准截止阀、截止止回阀主要部件材质

According to JIS B 2220 flange standard stop valveand stop check valve main parts material

3.示例HowtoOrder

1)PN1.6MPa, \mathsf { D N S Omm } 的A型法兰铸钢截止阀，法兰连接按ISO7005PN1.6MPa标准。 Forexample:PN1.6 DN50mm type Aflange cast steel stop valve according to ISO7005PN1.6MPa A16050 V026-01-1
2) PN1.6MPa,DN150的B型法兰青铜截止阀，法兰连接按JISB2220PN1.6MPa标准。 Forexample: PN1.6 MPa,DN150mm type B flange bronze stop valve,according to JIS B2220 PN1.6MPa B10150Q HLFV026-01-2
3)PN1.6MPa,DN80mm的A型法兰不锈钢截止止回阀，法兰连接按JISB2220PN1.6MPa标准。 For example: PN1.6MPa,DN80mm type Aflange stainless steel stop check valve,according to JISB 2220 PN1.6MPa A16080Cr V026-02-2

4.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按ISO7005或JISB2220. Flanges joint dimension conform to ISO 7005 or JISB 2220.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

水减压阀适用于各类船舶的给水系统管路。

一、水减压阀的基本尺寸按下图

2.标记示例

P10.3\~1.0 P20.1\~0.8 DN32的水减压阀：水减压阀10/2-8032 V027-00

3.技术要求

1)水减压阀的阀体、阀下盖材料为ZCuSn10Zn2;阀盘材料为HSn62-1;阀杆材料为QAI9-2；阀上盖材料为ZG230-450
2)阀体需用液压Ps等于2.4MPa进行强度和材料紧密度试验。在压力持续5min，如无渗漏变形和破裂，则认为合格。
3)产品装配后，需进行密封性试验和性能试验，本产品出口压力为稳压值。
4)法兰连接尺寸按ISO7005，结构尺寸按ISO5752.
5)每个产品应用下列备件：调节弹簧2根，膜片1个，密封环4个。如需增加备件品种和数量，由订货方在订货时
提出。

1.6PMa法兰青铜截止阀/截止止回阀 V029-01/02

PN1.6MPa法兰青铜截止阀和截止止回阀并广泛用于海洋船舶的海水、淡水、滑油、燃油和温度 \mathfrak { t } <=slant 250℃的蒸汽管路。其法兰连接尺寸符合ISO7005，结构长度符合ISO5752-1979

1参数和样图Main dimensionand drawing

1.1)主要参数TypeandBasicDimension

2)截止阀的基本尺寸

(mm)

2.标记示例Ordering Example

PN1.6 DN15的A型 (直通)法兰青铜截止阀：截止阀A16015 V029-01
PN1.6DN15的B型(直角)法兰青铜截止止回阀：截止止回阀B16015 V029-02

3.技术要求

1)截止阀阀体、阀盖、阀盘材料为ZCuSn10Zn2；阀杆材料为QAI9-2.
2)法兰连接尺寸按ISO7005.
3)其他制造、试验和验收技术条件按GB600-91。
4)阀的填料若订货方没有说明使用何种介质，则选用柔性石墨盘根。

PN2.0MPa法兰铸钢截止阀、截止止回阀适用于淡水、燃油、滑油、空气及温度低于300C的蒸汽管路。该产品法兰连接尺寸按JISB2220标准，结构尺寸符合JISF7313-1976及JISF7314-1976,并完全按照JIS标准设计生产。

This PN2.OMPaflange cast steel stop valve and stop check valve can be used for fresh water,sea water, lubricating oil,compressed airand steamof300Cand under.Mating dimensionsof the flanges conformto JlS B 2220,face to face dimension fit for JISF 7313-1976 and JISF 7314-1976.

1型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

2)图样和基本尺寸DrawingandDimensions

PN2.0MPa法兰铸钢截止阀/截止止回阀√ PN2.0MPaFlange cast steel stop&stop check valve V 030-01/02

2.1)法兰连接按JISB2220PN2.0MPa截止阀、截止止回阀基本尺寸 FlangesJointDimensionAccordingtoJISB2220PN2.0MPa

(mm)

二.主要部件材质表MAINPARTSMATERIAL

三.示例Howto Order

1)PN2.0MPa，DN50mm的A型法兰铸钢截止阀

For example: PN2.0 DN 5 0 {mm } type A cast steel stop valve A20050 V030-01 2)PN2.0MPa，DN150mm的B型法兰铸钢截止止回阀 Forexample:PN2.0 DN150 mm type B flange cast steel stop check valve B20150 V030-02

四.技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMAINPARTSMATERIALtable.
2)法兰连接尺寸按JISB2220PN2.0MPa。FlangesJoint dimensionsconformto JISB2220PN2.0MPa.
3)其他制造、试验和验收技术条件按GB600-91.Other specification of test and acceptance shall conform to GB600-91.

青铜甲板表面阀适用于温度在 - 1 0 ^ { \circ } C 至 + 8 0 ^ { \circ } \mathsf { C } 的淡水、海水、污水等介质的船舶甲板表面。该阀采用座板与甲板焊接形式安装，操纵部分可采用手轮或拔叉，长度可按要求调节，结构简单可靠。

This Bronze surfacevalvecan beused forfresh water,sea waterof-10C\~+80C.This valve should be welded on the deck of the ship.

1.参数和样图 Main Dimension and Drawing

1)主要参数TypeandBaseDimension

1.2)样图Drawing

2.公称压力1.0MPa的甲板表面阀基本尺寸

(mm)

二.主要部件材质表MAINPARTSMATERIAL

三.标记示例HowtoOrder

1)PN1.0MPa，DN50mm的手轮操纵青铜甲板表面阀

For example:PN1.OMPa DN50mm bronze surface valve with hand wheel operated H10050 V032-00

2)PN1.0MPa，DN250的铸钢拔叉式甲板表面阀

Forexample:PN1.0MPa,DN250mm caststeel surfacevalvewith fork operated F10250G V032-00

四.技术要求Specification

1)材质详见“主要部件材质表” ThevalvematerialsseeMAINPARTSMATERIALtable.
2)制造、试验和验收技术条件按GB600-91. specification of test and acceptance according to GB600-91.
3)各种型号的操纵部分尺寸，可按用户要求设计生产，并可提供液压操纵型式的表面阀。 The valve operator dimension can be produced according to customer's request.And the hydraulic actor operated surface valvealso can be produced.

该阀具有优异的密封性能，可替代一般的截止阀，适用于要求无泄漏的管路，尤其适用于易燃、易爆、有毒等介质的管路中作启闭装置，本阀也广泛被采用于导热油等管路。本阀门由上海海陆丰船用阀门有限公司生产。

This valve hasan excellnt sealing features which can replace stop valve and be suitableto the pipes that requiredno leakage,especialy to the pipes with flammable,explosiveand poisonous mediumas start-stopdevice, andthiskindofvalvecan bewidelyused inthepipes which transported hotoil,ithas obtained bestprestige

一、形式、参数和基本尺寸TypeandBasicCharacter

图样Drawing

mm

1.6MPa/2.5MPa法兰连接波纹管截止阀/截止止回阀 V033-01/02

stop check valve

四、标记示例How to OrderingPN1.6MPa，A型，DN50mm法兰连接波纹管截止阀PN1.6MPa,typeA,DN50mm FLANGEBELLOWS-SEALED STOPVALVEA16050 V033-01PN1.6MPa,A型，DN50mm法兰连接波纹管截止止回阀PN1.6MPa,typeA,DN50mm FLANGEBELLOWS-SEALEDSTOPCHECKVALVEA16050 V033-02

五.主要部件材料MaterialofMainParts

六、技术要求Specification

1.法兰连接尺寸按ISO7005.Flange connection conform to ISO 7005.
2.其他制造、验收标准技术条件按GB600-91.Other technical specification conform to GB600-91.

本阀具有优异的密封性能，可代替一般的截止阀，适用于要求无泄漏的管路中，尤其适用于易燃、易爆，有毒等介质的管路中作启闭装置。

一、图样Drawing

二、形式、参数、基本尺寸

三、标记示例

PN1.6MPaDN50的对焊直通截止阀16050 V034-00

四、技术要求

1.阀体、阀盖：ZG230-450
3.阀盘：1Cr18Ni9Ti堆焊硬质合金
5.填料：柔性石墨或聚四氟乙烯
7.其它制造、试验和验收技术条件按GB600-91
2.阀杆：1Cr18Ni9Ti
4.波纹管：1Cr18Ni9Ti
6.垫片：缠绕式垫片或聚四氟乙烯

1.6MPa/2.5MPa/4.0MPa对焊直通波纹管截止阀(锻造） V 035-00

stop valve(Cast)

该阀具有优异的密封性能，可替代一般的截止阀，适用于要求无泄漏的管路，尤其适用于易燃、易爆、有毒等介质的管路中作启闭装置，本阀也广泛被采用于导热油等管路。

This valve has an excellent sealing feature which can replace general stop valve and be suitable to the pipes thatrequired no leakage,especially to the pipes with flammable,explosive and poisonous mediumasstart-stop device,and thiskindofvalvecanbewidelyusedinthepipes whichtransported hotoil,ithasobtained bestprestige

一、图样Drawing

二、参数Character

mm

PN1.6MPaDN50对焊直通波纹管截止阀1.6MPaBELLOWS-SEALEDSTOPVALVE16050HLFV035-00

四、部件材料MainPartmaterial

五、技术要求Specification

其他制造、验收技术条件按 GB600-91．Other technical specification conform to GB600-91

法兰直角不锈钢空气安全阀适用于各类船舶的空气管路。
Flangeangleairsafetyvalve can be used to compressed airpipe line inship.

一、型式和尺寸TypeandMainDimensions

1)安全阀的型式和参数TypeandBasicDimensions

2.安全阀的基本尺寸

ISO1.0MPa和JIS1.0,3.0MPa法兰 FLANGE ISO1.0MPaand JIS1.0,3.0MPa

ISO4.0MPa法兰 FLANGEISO4.0MPa

二、法兰连接尺寸Dimension

3.Dimension Conformto ISO7005PN1.0MPa,PN4.0MPa

(mm)

法兰直角不锈钢空气安全阀V 036-00

(mm)

三、标记示例OrderingExample

1.符合ISOPN1.0MPa, D N 3 2mm 的法兰直角不锈钢空气安全阀

According to ISO PN1.0MPa,DN32mm Flangeangleairsafety valve B10025 V036-00-1

2.符合JISPN3.0MPa，DN32mm的法兰直角不锈钢空气安全阀 AccordingtoJISPN3.0MPa,DN32mmFlangeangleairsafetyvalve B30032 V036-00-2

四、技术要求Specification

1)主要部件的材料见下表。Thevalvematerialssee the tableMATERIALOFMAINPARTS
2)安全阀总装后的性能调试按CB3021-77。Afterassembled test it conform to CB3021-77.
3)其他要求按GB600-91。Other specification of test and acceptance shall conform to GB600-91.

MATERIALOFMAINPARTS

PN1.6MPa内螺纹不锈钢球阀适用于工作温度-20 \mathbf { \bar { C } } <=slant \mathbf { \mathfrak { t } } <=slant 150℃的水、蒸汽、及油类介质的船舶管路上，做启闭用。

This female thread stainless steel ballvalve can be used for temperature range -20c\~150c fresh water,sea water,lubricatingoil pipe line.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

(mm)

PN1.6MPa二片式内螺纹不锈钢球阀 V 037-00

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

1) PN1.6MPa, 1 / 2 ^ { \ast } 的内螺纹不锈钢球阀

Forexample:PN1.6MPa 1 / 2 ^ { * } female thread stainless steel ball valve G1/2 V037-00

2)PN1.6MPa, 1 ^ { 1 } { { / } } _ { 2 } ^ { * } 的内螺纹青铜球阀

Forexample:PN1.6MPa 1 ^ { 1 } I _ { 2 } female threadbronzeball valve G11/2 Q V037-00

3)PN1.6MPa, 2 ^ { \ast } 的内螺纹铸钢球阀

Forexample:PN1.6MPa, 2 ^ { * } female thread cast steel ball valve G2G V037-00

四、技术要求Specification

1)材质详见“主要部件材质表”

ThevalvematerialsseeMain parts此外，球阀的材质可由订货方选定，包括304/316/316L等不锈钢材质的球阀均可生产。And,if customerneeds,theotherkindsofstainlesssteelsuchas304,316,316L,alsocanbeusedforthis valve.
2)螺纹连接尺寸按GB7307.Female joint dimension conform to GB7307.
3)其他制造、试验和验收技术条件按GB600-91.Other specification of test and acceptance shall conform to GB600-91.

法兰不锈钢球阀适用于工作温度-20℃ \ K _ { \mathsf { t } } <=slant 150℃的水、蒸汽、油类及弱酸碱溶液等介质的船舶管路上，做启闭用。法兰接口标准可按ISO7005及JISB2220生产

This Flange stainless steel ballvalve can be used for temperature range -20℃ <=slant \mathfrak { t } <=slant 150℃ fresh water,sea water,lubricatingoilpipe line.Mating dimensionsof theflangescanaccording to ISO70o5or JISB2220.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

(mm)

(mm)

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

1)PN1.0MPa,DN50mm的法兰不锈钢球阀，按ISO1.0MPa Forexample:According to ISO PN1.0MPa,DN50mm flange stainless steel ball valve.10050 V038-00-1
2) PN1.0MPa,DN50mm的法兰铸钢球阀，按ISO0.6MPa Forexample:According to ISO PN 0.6MPa,DN50mm flange cast steel ballvalve 6050G V038-00-1
3)PN1.0MPa，DN50mm的法兰青铜球阀，按JIS1.0MPa Forexample:According to JIS PN1.0MPa,DN150mm flange bronze ball valve 10150Q V038-00-2

四、技术要求Specification

1)材质详见“主要部件材质表”

ThevalvematerialsseeMainparts 此外，球阀的材质可由订货方选定，包括304/316/316L等不锈钢材质的球阀均可生产。 And,if customerneeds,theotherkindsofstainlesssteelsuchas304,316,316L,alsocanbeusedforthis valve.
2)法兰连接尺寸按ISO7005或JISB2220. Flange joint dimensionconform to ISO 7005 or JISB 2220.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

PN1.6/4.0MPa Flange stainless ball valve

PN1.6/4.0MPa法兰不锈钢球阀适用于工作温度-20℃ <=slant \mathfrak { t } <=slant 150℃的水、蒸汽、油类及弱酸碱溶液等介质的船舶管路上，做启闭用。法兰接口标准可按ISO7005及JISB2220生产

This flange stainless steelballvalve can be used for temperature range-20\~150C fresh water,sea water lubricating oil pipe line.Mating dimensions of the flanges can according to ISO 7o05 or JIS B 2220.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

2.1)按ISO1.6/4.0MPa基本尺寸 According to ISO1.6/4.0MPa Basic Dimensions

(mm)

(mm)

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

1)PN4.0MPa，DN50mm的法兰不锈钢球阀，按ISO4.0MPa Forexample:According to ISO PN4.0MPa,DN50mm flange stainless stell ball valve. 40050 V039-00-1
2)PN1.6MPa,DN150mm的法兰铸钢球阀，按ISO1.6MPa Forexample:According to ISOPN1.6MPa,DN1 5 0 \mathsf {mm } flangecaststeel ball valve 16150G V039-00-1
3)PN4.0MPa，DN80mm的法兰青铜球阀，按JIS4.0MPa Forexample:According to JIS PN4.0MPa,DN80mm flange bronze ball valve 40080Q V039-00-2

四、技术要求Specification

1)材质详见“主要部件材质表”

The valve materials see Main parts此外，球阀的材质可由订货方选定，包括304/316/316L等不锈钢材质的球阀均可生产。And,if customerneeds,theotherkindsofstainlesssteelsuchas304,316,16L,alsocanbeusedforthis valve.
2）法兰连接尺寸按ISO7005或JISB2220.Flange joint dimension conform to ISO 7005 or JIS B 2220.
3)其他制造、试验和验收技术条件按GB600-91.Other specification of test and acceptance shall conform to GB600-91.

PN1.0/1.6MPa法兰三通不锈钢球阀适用于工作温度-20℃C <=slant { \mathfrak { t } } <=slant 150℃的水、蒸汽、油类及弱酸碱溶液等介质的船舶管路上，做启闭用。法兰接口标准按ISO7005

This flange three-way stainless steel ballvalvecan be used for temperature range -20°c\~150C fresh water, sea water,lubricating oil pipe line.Mating dimensions of the flanges canaccording to ISO 7005.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

(mm)

PN1.0/1.6MPa法兰三通不锈钢球阀√ PN1.6/1.6MPa Three-way stainlesssteel ballvalve V 040-00

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

1)PN1.0MPa，DN50mm的法兰不锈钢L型球阀，按ISO1.0MPa For example:According to ISO PN1.0MPa,DN50mm flange stainless steel ball valve,Type L, L10050Cr V040-00
2)PN1.0MPa,DN50mm的法兰铸钢T型球阀，按ISO1.0MPa Forexample:According to ISO PN1.0MPa,DN50mm flange cast steel ballvalve TypeT, T10050G V040-00
3)PN1.6MPa，DN50mm的法兰青铜球阀，按ISO1.6MPa Forexample: According to ISO PN1.6MPa,DN50mm flange bronze ballvalve,Type T, T16050Q V040-00

四、技术要求Specification

1)材质详见“主要部件材质表”

The valve materials see Main parts 此外，球阀的材质可由订货方选定，包括304/316/316L等不锈钢材质的球阀均可生产。 And,if customerneeds,theotherkinds ofstainless steelsuchas304,316,316L,alsocan beusedforthis valve.
2)法兰连接尺寸按ISO7005 Flange joint dimension conform to ISO 7005.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

PN3.0MPa二片式内螺纹不锈钢球阀适用于工作温度-20C <=slant \mathfrak { t } <=slant 150℃的水、蒸汽、及油类介质的船舶管路上，做启闭用。

This female thread stainless steel ballvalve can be used for temperature range -20°c\~150C fresh water,sea water,lubricatingoil pipe line.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

2.1)基本尺寸 Basic Dimensions

(mm)

PN3.0MPa二片式内螺纹不锈钢球阀 V 041-00

二、主要部件材质表MainPartsMaterial

三、示例Howto Order

1)PN3.0MPa, 1 / 2 ^ { * } 的内螺纹不锈钢球阀

Forexample:PN3.0MPa, 1 1 2 ^ { \circ } female threadstainlesssteelball valve G1/2 V041-00

2) PN3.0MPa, 2 ^ { \circ } 的内螺纹青铜不锈钢球阀 Forexample:PN3.0MPa 2 ^ { \circ } female threadbronze ball valve G2Q V041-00

3)PN3.0MPa, 2 ^ { \circ } 的内螺纹铸钢球阀 Forexample:PN3.0MPa, 2 ^ { \circ } female threadcast steel ball valve G2G V041-00

四、技术要求Specification

1)材质详见“主要部件材质表”ThevalvematerialsseeMainparts此外，球阀的材质可由订货方选定，包括304/316/316LAnd,if customer needs,theotherkindsofstainlesssteelsuchas304,316,316L,alsocanbeused forthis valve.
2)螺纹连接尺寸按GB7307Female joint dimension conform to GB7307.
3)其他制造、试验和验收技术条件按GB600-91.Other specification of test and acceptance shall conform to GB600-91.

PN3.0MPa三片式内螺纹不锈钢球阀适用于工作温度-20℃ K _ { \uparrow <=slant } 150 的水、蒸汽、及油类介质的船舶管路上，做启闭用。

This 3pc female thread stainless steel ballvalvecan be used for temperature range -20C\~150C fresh water seawater, lubricatingoil pipe line.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

2.1)基本尺寸 Basic Dimensions

(mm)

PN3.0MPa三片式内螺纹不锈钢球阀 V 042-00

二、主要部件材质表MainPartsMaterial

三、示例HowtoOrder

1)PN3.0MPa, 1 1 2 ^ { \circ }

Forexample:PN3.0MPa, 1 1 2 ^ { \circ } female thread stainlesssteel ball valve G1/2 V042-00

2)PN3.0MPa, 2 ^ { * } 的内螺纹青铜球阀 Forexample:PN3.0MPa 2 ^ { \circ } female thread bronze ball valve G2Q V042-00

3)PN3.0MPa, 2 ^ { \circ } 的内螺纹铸钢球阀 Forexample:PN3.0MPa, 2 ^ { * } female thread cast steel ball valve G2G V042-00

四、技术要求Specification

材质详见土委部件材质衣

ThevalvematerialsseeMainparts 此外，球阀的材质可由订货方选定，包括304/316/316L And,if customerneeds,theotherkindsofstainlesssteelsuchas304,316,16L,alsocanbeusedforthis valve.
2)螺纹连接尺寸按GB7307. Female joint dimension conform to GB7307.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

二片式承插焊外螺纹不锈钢球阀适用于工作温度-20℃C≤t≤150，工作压力在1.0MPa-4.0MPa的水、蒸汽、及油类介质的船舶管路上，做启闭用。

This 2pc male thread stainless steel ball valve with socket-welding can be used for temperature range -20C \~150C,pressure range 1.oMPa-4.OMPa,fresh water,sea water,lubricating oil pipe line.

一、型式、参数和基本尺寸TypeandMainDimensions

1)型式和基本参数TypeandBasicDimension

2)图样Drawing

2.1)基本尺寸 Basic Dimensions

(mm)

二片式承插焊外螺纹不锈钢球阀V 043-00

二、主要部件材质表MainPartsMaterial

三、示例How to Order

1)DN15,PN1.0MPa的二片式承插焊外螺纹不锈钢球阀 Forexample:DN15,PN1.0MPa 2pc male thread stainless steel ballvalve,socket-welding 10015 V043-00
2)DN40,PN4.0MPa的二片式承插焊外螺纹铸钢球阀 Forexample:DN40,PN4.0MPa 2pc male thread Cast steel ball valve,socket-welding 40040G V043-00

四、技术要求Specification

1)材质详见王要部件材质表

The valve materials see Main parts 此外，球阀的材质可由订货方选定，包括304/316/316L And,if customerneeds,theother kindofstainlesssteelsuchas304,316,316L,alsocanbeusedfor thisvalve.
2）螺纹连接尺寸按GB7307 Male joint dimension conform to GB7307.
3)其他制造、试验和验收技术条件按GB600-91. Other specification of test and acceptance shall conform to GB600-91.

铸钢电动截止阀、截止止回阀除能实现普通截止阀的功能外，还采用多回转电动装置，可以实现现场操作或远距离集控。可以进行力矩、行程控制。根据用户要求，可安装闪光指示，开度电信号传送，开度指示等功能。

The valve is widely adopted forbulk-cargo carrier,oil tanker etc.Available medium is sea water,fresh water, air,crude oil and finished oil that temperature is 7 0 ^ { \circ } { C } and under。

1.2)样图 Drawing

A型

B型

截止阀 <br>A型

B型<br>截止止回阀

法兰铸钢电动截止阀/截止止回阀V 044-01/02

二、结构尺寸Dimensions

三、标记示例：Howtoorder

A10100 V044-0 1 1)2) 3) 4) 5)

1)阀体型式(Type of Construcation):A一直通 (Throughway type）B—直角(Angle type)
2)公称压力(Nominal pressure): \mathsf { P N } ( \mathsf {kg } . \mathsf { f } / \mathsf {cm } ^ { 2 } ) （204号
3)公称通径(Nominal Diameter):DN(mm)
4)法兰标准(Flangestandard):1-ISO7005,2-JISB2220
5)标准(Companystandard)

四、技术条件Specification

1.电动头的安装方向和具体技术参数订货时确定。 The technical specificationand mounting type of the motor actuatorsee"Technical Agreement"

2.阀门的检验验收按GB600-91. Otherspecification of test according to GB600-91.

本阀适用于介质为海水、淡水、原油及成品油温度不高于 1 7 0 ^ { \circ } C 的船舶管路，其对夹法兰连接尺寸符合JISB2240或者ISO7005。舌型止回阀具有结构轻巧、紧凑的特点，该阀应竖直安装于水平管路上，且不适用于压力突变，流速很高的管路中。

This wafer type swing check valve can be used for fresh water,sea water,crude oil and finished oilt170C cargopipelinesystem.Mating dimensions oftheflanges conform to ISO7005or JlSB2240.Thisswing check valve should be fixed vertically in the pipe line and the flowin the pipe is stably.

1.参数和样图Main Dimension andDrawing

1)主要参数TypeandBaseDimension

1.2)样图 Drawing

二、结构尺寸ValveDimension

）法兰连接尺寸按ISO0.6/1.0/1.6MPaFlange JointDimensionConform to ISOPN0.6/1.0/1.6MPa

(mm)

(mm)

4.标记示例OrderingExample
1)ISO 标准0.6MPaDN50mm青铜阀体，青铜蝶板，丁腈橡胶密封，对夹式舌型止回阀 ISO PNO.6MPa DN50 Cast steel body,bronze discand NBR seal ring wafer type swing check valve 6050 V045-00-1-QQN
2)JIS标准1.0MPaDN125mm不锈钢阀体、不锈钢蝶板，氟橡胶密封，对夹式舌型止回阀 JIS PN1.OMPa DN125 Stainless steel body,bronze discand FPMsealring wafer type swing check valve 10125 V045-00-2-CrCrF

5技术要求Specification

1).材料见主要部件材料表Thevalve materials see MaterialofMainParts".

2).其他技术要求、试验方法和检验规则按GB600-91.Otherspecification of test and acceptance standard see GB600-91.

3).阀体材料不推荐采用铸钢，必须采用时也只提供DN >=slant 3 0 0 \mathsf {mm } 的阀件。If thebodymaterialneedcaststeel,only the valvel { 2 N >= 3 0 0 } \mathsf {mm }

PN4.0MPa Flange cast steel strike type stopcheck valve PN4.0MPa法兰铸钢撞击式截止止回阀 V 068-00

PN4.0MPa法兰铸钢截止止回阀适用于淡水、燃油、滑油及温度低于300℃的蒸汽管路。该产品法兰连接尺寸按ISO 5752-1979或JISB2220-1990连接标准，结构长度符合ISO5752-1982(E)。

This flange cast steel stopcheck valve can be used for fresh water，sea water，lubricating oil and steam of 3 0 0 ^ { \circ } \mathsf { C } and under。Mating dimensions of the flanges conform to ISO2084-1974 or JIS B 2220-1990, structure dimension fit for ISO5752-1982(E).

一.型式、参数和基本尺寸TYPEANDMAINDIMENSIONS

1)型式和基本参数TypeandBasicDimension

(mm)

Type A

Type B

FlangesJoint Dimensions Accordingto ISO2084-1974PN4.0MPa See Table 2

PN4.0MPa法兰铸钢撞击式止止回阀√PN4.0MPa Flange caststeelstrike type stop check valve V 068-00

2.3)法兰连接按JISB2220-1990PN4.0MPa截止止回阀基本尺寸见表3 FlangesJointDimensions According to JISB2220-1990 PN4.0MPa See Table3

（mm）

三.示例HowToOrder

1）PN4.0MPa，DN50mmA型法兰铸钢撞击式截止止回阀，法兰连接按ISO2084-1974PN4.0MPa标准。 Forexample：PN 0.6.DN50mm type A flange cast steel action stop check valve according to ISO2084-1974PN4.0MPaA40050HDMV36-00-1
2)PN4.0MPa.DN80mm的B型法兰铸钢撞击式截止止回阀，法兰连接按ISOB2220-1990PN4.0MPa标准。 For example:PN4.0，DN80mm type B flange cast steel action stop check valve according to JIS B 2220-1990 PN4.0MPaA40080HDMV36-00-2

4.技术要求Specification

1）材质详见“主要部件材质表”。ThevalvematerialsseeMAINPARTSMATERAL
3)法兰连接尺寸按ISO2084-1974或JISB220-1990。FlangesjointdimensionconformtoISO2084-1974orJISB2220-1990.
3)其他制造、试验和验收技术条件按GB600-91。Other specification of test and acceptance shallconform to GB600-91.
1.阀体 2.被动扳手 3.连杆 4.连动扳手
5.螺母 6.销钉 7.螺钉 8.螺母
9.止动螺钉 10.固定板 11.铭牌座 Z 百 12.铭牌

(mm)

(mm)

法兰直角燃油管系安全阀适用于各类船舶的燃油管系管路，同时也可用于水管路。该阀门法兰连接标准符合JISB22201.0MPa或ISO70051.0MPa标准。

Flangeanglepueloilpipelinesafety valvecan beusedto fueloilpipe line or water pipelineinship.Connection dimensions of the flangesareaccording to ISO 70051.0MPaor JISB22201.0MPa.

一、形式和尺寸TypeandBasicDimension

2.安全阀的尺寸Drawing and Dimension

法兰直角燃油管系安全阀SV 03-00

二.主要部件材质见下表MainPartsMaterial

三、标记示例How to Ordering

1)符合ISOPN1.0MPa,DN32mm的铸钢法兰直角燃油管系安全阀 According to ISO PN1.0MPa,DN32mm cast steel flange Angle fuel oil pipe linesafety valve B10032 SV03-00-1
2)符合JISPN1.0MPa,DN32mm的青铜法兰直角燃油管系安全阀 According to JISPN1.0MPa,DN32mm bronze flange Angle fueloil pipe line safety valve B10032Q SV03-00-2

四、技术要示Specification

1)主要部件的材料见表.Themainpartsmaterialsee te tableMATERlALOFMAINPARTS.
2)安全阀总装后的性能调试按CB3021-77。After assembling test standard according to CB3021-77.
3)其他要求按GB6o0-91。Other specification of test and acceptance shall according to GB600-91.

一、产品的结构参照下图：

二、产品的结构尺寸

(mm)

(mm)

空气减压阀适用于船用空气系统，该产品输出压力稳定不随输入压力得变化而变化。该产品适用于最高温度不超过60℃，最大工作压力不超过3.0MPa的空气管路系统。本产品由上海海陆丰船用阀门有限公司生产。可提供符合ISO标准和JIS标准及GB标准的各种规格供用户选用，并可与截止阀，滤器和安全阀等组装成减压阀组整体提供给用户。

Air Pressure Reducing Valve can be used for marine air system.It can keep outlet pressure stabilizing in needed.Themax.working temperature is 6 0 ^ { \circ } { C } and max.working pressure is 3.0 MPa.The mating dimensions of theflangesaccording to ISO7005orJISB2220orGB569-65.Thisair pressrereducing valvealsocanbemounted into AIR REDUING UINIT.

一、型式、参数和基本尺寸TypeandMainDimensions1)型式和基本参数TypeandBasicDimension

Ptston Type

Diaphragm Type (DN ≤25)

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

二、示例How to Order

1)用于进口压力P1=0.4-3.0MPa,出口压力P2=0.2-1.2MPa,公称通径 _ { \mathsf { D N } 4 0mm } 的青铜活塞式减压阀：(ISO标准法
兰)
Inlet pressure P1=0.4-3.0MPa,Outlet Pressure { \mathsf { P } } 2 { = } 0 . 2 -1.2MPa,DN40mm Cast Bronze Air Pressure Reducing
Valve(Flange Dimensionaccording to ISO PN4.0MPa)
4-30/2-12040 MV21-00-1-DHQ
2)用于进口压力P1=0.4-1.0MPa,出口压力P2=0.2-0.8MPa,公称通径DN15mm的不锈钢膜片式减压阀：(JIS标准法
兰）
Inletpressure P1=0.4-1.0MPa,Outlet Pressure P2=0.2-0.8MPa,DN15mm Cast Stainless SteelAir Pressre
Reducing Valve (Flange Dimensionaccording to JIS B 2220-1990 PN1.0MPa)
4-10/2-8015 MV21-00-2-DMCr

三、空气减压阀代号编制TheCodeName例如ForExample:

4-30/ 2-12 040 HLFMV21-00 -1 -D H G（1） (2) (3） (4) (5) (6) （7) （8）

(1)进口压力InletPressure (3-0.4MPa)
(2)出口压力Outlet Pressure (1.2-0.2MPa)
(3)公称口径Nominal Diameter (15-50mm)
(4)厂标Standard
(5)法兰连接标准FlangeStandard,1-ISO7005,2-JISB2220,3-GB569-65
(6)D--表示单只减压阀(与减压阀组区分）D--SingleAirPressureValve
(7)减压阀型式TypeH--活塞式，M--膜片式H--DiaphragmTypeM--PistonType
(8)减压阀材质Material of bodyQ-ZCuAl9Mn2，Cr-ZG1Cr18Ni9Ti

四、技术要求Specification

1)减压阀的正常工作条件为减压阀的输入和输出压力差必须≥0.2MPa. The inlet pressure must ≥ 0.2MPa outlet pressure,so the valve can work effectively.
2)减压阀在管路中必须在其进气端配备空气滤器，以保证减压阀的正常工作。 To protect the reducing valve,one filterbefore its inlet isneeded.
3)为保证减压阀性能，减压阀需正向直立安装 To insure reducing valve work well,the valve shouldbe fix in pipe right vertically.
4)减压阀的性能试验按GB/T3396-92 Airpressure reducing valve function teststandard according to GB/T3396-92
5)其他制造、试验和验收技术条件按GB600-91. Otherspecification of testandacceptanceshallaccordingto GB600-91

稳压阀是船舶滑油注入系统必备阀门，该阀也适用于燃油、滑油、海水和淡水管系。其法兰连接尺寸符合JISB 2220,ISO 7005或者GB569-65。

This pressure-stabilizing valve for marine diesel engine lubricating oil inletsystem,isalsosuitable for fueloil sea water,and fresh water of ship.Flanged ends to ISO 7005 or JIS B2220 or GB569-65.

1.参数和样图Main Dimension and Drawing

1)主要参数TypeandBasicDimension

2)样图Drawing